SMC Networks SMC7724M/VSW Password-thresh, To set the timeout to 120 seconds, enter this command

COMMAND LINE INTERFACE

Command Mode

Line Configuration

Command Usage

•If there is user input within the exec-timeout interval, the current session will be maintained. If there is no user input within this time interval, the current session is terminated.

•This command applies to both the local console and Telnet connections.

•The timeout for Telnet cannot be disabled.

Example

To set the timeout to 120 seconds, enter this command:

Console(config-line)#exec-timeout 120

Console(config-line)#

password-thresh

Use this command to set the password intrusion threshold which limits the number of failed logon attempts. Use the no form to remove the threshold value.

Syntax

password-thresh threshold no password-thresh

threshold - The number of allowed password attempts. (Range: 1-120; 0: no threshold)

Default Setting

The default value is three attempts.

Command Mode

Line Configuration

Command Usage

•When the logon attempt threshold is reached, the system interface becomes inaccessible for a specified amount of time before allowing

3-62