CHAPTER 3 COMMAND LINE INTERFACE

Using the Command Line Interface

Accessing the CLI

When accessing the management interface for the switch over a direct connection to the server’s console port, or via a Telnet connection, the switch can be managed by entering command keywords and parameters at the prompt. Using the switch's command-line interface (CLI) is very similar to entering commands on a UNIX system.

Console Connection

To access the switch through the console port, perform these steps:

1.At the console prompt, enter the user name and password. The default user names are “admin” and “guest” with corresponding passwords of “admin” and “guest.”

When the administrator user name and password is entered, the CLI displays the “Console#” prompt and enters privileged access mode (i.e., Privileged Exec.)

When the guest user name and password is entered, the CLI displays the “Console>” prompt and enters normal access mode (i.e., Normal Exec.)

3-1

Page 137
Image 137
SMC Networks SMC7724M/VSW manual Using the Command Line Interface, Accessing the CLI