SMC Networks SMC7724M/VSW manual 130

CONFIGURING THE SWITCH

Web Interface

Click Priority/IP Priority Status and then select Enabled.

Click IP Port Priority from the Priority menu. Select the port or trunk. To add an IP port, type the port number in the IP Port box and the new CoS value in the Class of Service box, then click “Apply.” To delete an IP port setting, select the entry in the Current IP Port Table, then click “Remove IP Port.”

Command Line Interface

The following example shows IP Port 80 mapped to CoS value 0 for ethernet port 1.

Console(config)#map			ip port	3-130
Console(config)#interface ethernet 1/5
Console(config-if)#map ip port 80 cos 0				3-131
Console(config-if)#end
Console#	show map ip port ethernet 1/5			3-135
TCP port	mapping status: enabled
Port		Port no. COS
--------- --------			---
Eth 1/	5	23	0
Eth 1/	5	80	0
Eth 1/	5	1020	6
Console#

2-76