SMC Networks SMC7724M/VSW manual Queue cos-map, 127, Show queue bandwidth

PRIORITY COMMANDS

Command Usage

WRR allows bandwidth sharing at the egress port by defining scheduling weights.

Example

The following example shows how to assign WRR weights of 1, 3, 5 and 7 to the CoS priority queues 0, 1, 2 and 3:

Console(config)#queue bandwidth 1 3 5 7

Console(config)#

Related Commands

show queue bandwidth

queue cos-map

Use this command to assign class of service (CoS) values to the CoS priority queues. Use the no form set the CoS map to the default values.

Syntax

queue cos-mapqueue_id [cos1 ... cosn] no queue cos-map

•queue_id - The queue id of the CoS priority queue.

•Ranges are 0 to 3, where 3 is the highest CoS priority queue.

•cos1 .. cosn - The CoS values that are mapped to the queue id. It is a space-separated list of numbers. The CoS value is a number from 0 to 7, where 7 is the highest priority.

3-127