SMC Networks SMC7724M/VSW manual Action

COMMAND LINE INTERFACE

•bridge-group- Bridge group index (bridge 1.)

•mac-address- MAC address.

•vlan-id- VLAN ID (Range: 1-4094)

•interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

•port-channel channel-id(Range: 1-6)

•action -

-delete-on-reset - Assignment lasts until switch is reset.

-permanent - Assignment is permanent.

Default Setting

No static addresses are defined. The default mode is permanent.

Command Mode

Global Configuration

Command Usage

The static address for a host device can be assigned to a specific port within a specific VLAN. Use this command to add static addresses to the MAC Address Table. Static addresses have the following characteristics:

•Static addresses will not be removed from the address table when a given interface link is down.

•When a static address is dynamically learned on an interface, it will not be written to the address table..

Example

Console(config)#bridge 1 address 00-e0-29-94-34-de vlan 1 forward ethernet 1/1 delete-on-reset

Console(config)#

3-80