SMC Networks SMC7724M/VSW manual Gvrp and Bridge Extension Commands

COMMAND LINE INTERFACE

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to exchange VLAN information in order to automatically register VLAN members on interfaces across the network. This section describes how to enable GVRP for individual interfaces and globally for the switch, as well as how to display default configuration settings for the Bridge Extension MIB.

Command	Function	Mode	Page
Interface Commands
switchport gvrp	Enables GVRP for an	IC	3-108
	interface
switchport forbidden vlan	Configures forbidden VLANs	IC	3-103
	for an interface
show gvrp configuration	Displays GVRP configuration	NE,	3-109
	for selected interface	PE
garp timer	Sets the GARP timer for the	IC	3-110
	selected function
show garp timer	Shows the GARP timer for the	NE,	3-111
	selected function	PE
Global Commands
bridge-ext gvrp	Enables GVRP globally for	GC	3-112
	the switch
show bridge-ext	Shows bridge extension	PE	3-113
	configuration

Note: The access mode shown in the table is indicated by these abbreviations: NE (Normal Exec), PE (Privileged Exec), GC (Global Configuration), IC (Interface Configuration),

LC (Line Configuration), VC (VLAN Database Configuration.)

3-108