Manuals / SMC Networks / Computer Equipment / Switch

SMC Networks SMC7724M/VSW manual Vdsl Port Link Status, 103

Models: SMC7724M/VSW

1 316

Download 316 pages 43.27 Kb

Page 131

VDSL CONFIGURATION

VDSL Port Link Status

Fields and Attributes

•Link – Shows the status of the VDSL link.

•Link Fail Count – The number of times the switch has tried to re-establish the link with the CPE since the link went down.

•SNR (dB) – The signal-to-noise ratio of the switch.

•Downstream Rate (Mbps) – The rate at which data is transmitted from the switch to the CPE.

•Upstream Rate (Mbps) – The rate at which data is transmitted from the CPE to the switch.

•Local Receiver Power (dBm/Hz) – The power at which the signal from the CPE port is received on the switch VDSL port.

•Remote Transmit Power (dBm/Hz) – The power at which the signal is transmitted from the CPE port to the switch.

•PMD-S – Physical Media Dependent Flag for the VDSL chip.

•Downstream Reed-Solomon Errors – The number of errors in the downstream data that have been corrected by the Reed-Solomon code.

•Upstream Reed-Solomon Errors – The number of errors in the upstream data that have been corrected by the Reed-Solomon code.

•Local/Remote Receive Interleave Depth – The interleave depth is a parameter that determines the degree of protection of the data signal against impulse noise provided by interleaving. The values of the interleave depth that can be set by the user are 0, 1, 2, 8, and 16; 16 specifies maximum protection. Local Receive Interleave Depth refers to protection provided on the signal received at on the VDSL switch port. Remote Receive Interleave Depth refers to protection provided on the signal received on the CPE port.

2-103

Image 131

SMC Networks SMC7724M/VSW manual Vdsl Port Link Status, 103

Contents

TigerAccess Extended Ethernet System Page TigerAccess Extended Ethernet System Management Guide Trademarks Contents Contents Iii Command Line Interface Contents Contents Contents Vii Viii Configuration Options Connecting to the Switch Switch Management Required Connections Remote Connections Console Connection Basic Configuration Setting Passwords Manual Configuration Setting an IP Address Switch Management Dynamic Configuration Community Strings Enabling Snmp Management Access Trap Receivers Managing System Files Saving Configuration Settings System Defaults Function Parameter Default Following table lists some of the basic system defaults Pvid EFM Rdsl Using the Web Interface Configuring the Switch Configuring the Switch Home Navigating the Web Browser Interface Button Action Main Menu Panel Display STA Vlan Port Igmp Fields and Attributes Displaying System Information Specify the hostname, location and contact information Command Line InterfaceWeb Interface Setting the IP Address Using DHCP/BOOTP Manual Configuration Web Interface Command Line Interface Renewing Dchp Enter the following command to restart Dhcp serviceConfiguring the Login Password Security Configuring Radius Logon Authentication Click System/Radius Managing Firmware Downloading System Software from a Server Command Usage Saving or Restoring Configuration Settings To start the new firmware, reboot the system Web Interface Setting the Startup Configuration File Web Interface Copying the Running Configuration to a File Web Interface Example ResetUse the reload command to reboot the system Displaying Bridge Extension Capabilities Click System/Bridge Extension Fields and Attributes Main Board Displaying Switch Hardware/Software VersionsEnter the following command Use the following command to display version information Click System/Switch Information Displaying Connection Status Port Configuration This example shows the connection status for Port Configuring Interface Connections Web Interface Select the interface, and then enter the required settings Setting Broadcast Storm Thresholds Configuring Port Mirroring Click Port/Port Security Configuration Configuring Port Security Displaying the Address Table Address Table Settings Command Line Interface Setting Static Addresses This example also sets the aging time to 400 seconds Changing the Aging Time Global setting apply to the entire switch Spanning Tree Protocol ConfigurationManaging Global Settings Configuring the Switch Click Spanning Tree/STA Information Displaying the current global settings for STA Web Interface Configuring the global settings for STA Web Interface Managing Interface Settings Click STA/STA Trunk Information or STA Port Information This example shows the STA attributes for port This example sets the STP attributes for port Vlan Configuration Assigning Ports to VLANs Forwarding Tagged/Untagged Frames This example enables Gvrp for the switch Enabling or Disabling Gvrp Global Setting Click VLAN/VLAN Base Information Displaying Basic Vlan Information Web Interface Fields and Attributes Displaying Current VLANs 104 Command Line Interface Fields and Attributes This example creates a new Vlan Creating VLANs Adding Interfaces Based on Membership Type 102 Adding Interfaces Based on Static Membership Configuring Vlan Behavior for Interfaces Creating Vlans 100 Enabling Private VLANs Configuring Private VLANsConfiguring Uplink and Downlink Ports This example enables private VLANs 9-16 17-24 25 Creating Vlans Command Line Interface Setting the Default Priority for Interfaces Class of Service Configuration This example assigns a default priority of 5 to port Priority Level Traffic Type Mapping Priority Classes to Egress Queues Fields and Attributes 127 Queue Scheduling Click Priority/Queue Scheduling Mapping Layer 3/4 Priorities to CoS Values Mapping IP Precedence Web Interface 131 Mapping Dscp Priority Web Interface Mapping IP Port Priority 130 Copy Priority Settings Port Trunk Configuration Port Trunk Configuration 142 Configuring Snmp Access Mode Setting Community Access Strings Specifying Trap Managers Configuring Igmp Parameters Multicast Configuration Multicast Configuration Web Interface 117 Interfaces Attached to a Multicast Router Specifying Interfaces Attached to a Multicast Router 122 Displaying Port Members of Multicast Services Adding Multicast Addresses to VLANs Showing Device Statistics Showing Device Statistics This example shows statistics for port Rate Limit Configuration 163 Vdsl Global Configuration Vdsl Configuration Fields and Attributes Click VDSL/VDSL Global Configuration Vdsl Port Configuration 100 Click VDSL/VDSL Port Configuration 101 Configuring a User-specified EFM Profile Click VDSL/VDSL Profile User Specified 102 103 Vdsl Port Link Status Click VDSL/VDSL Port Link Status 104 156 105 Click VDSL/VDSL Port Ethernet Statistics Displaying Vdsl Port Ethernet Statistics106 107 108 Accessing the CLI Using the Command Line Interface Telnet Connection Keywords and Arguments Entering CommandsThis section describes how to enter CLI commands Minimum Abbreviation Command CompletionGetting Help on Commands Command show interfaces ? displays the following information Showing Commands Partial Keyword Lookup Negating the Effect of CommandsUsing Command History Exec Commands Understanding Command Modes Configuration Commands Keystroke Function Command Line Processing Command Description Group Command Groups 163 LC Line Configuration, VC Vlan Database Configuration General Commands Command Mode EnableSyntax enable level Default Setting Related Commands Disable Normal Exec, Privileged Exec ConfigureShow history End Reload Use this command to restart the systemThis command resets the entire system Exit This example shows how to reset the switchUse this command to return to Privileged Exec mode End Quit Use this command to exit the configuration programThis example shows how to quit a CLI session Copy Flash/File Commands Privileged Exec Following example shows how to download a configuration file Syntax Use this command to delete a file or imageFilename Name of the configuration file or image name Delete Dir Use this command to display a list of files in Flash memorySyntax Dir boot-rom config opcode filename Following example shows how to display all file information Whichboot Dir whichboot Boot systemSyntax Boot system boot-rom config opcode filename Global Configuration Command Function Mode System Management Commands Name The name of this host. Maximum length 255 characters HostnameSyntax Hostname name no hostname Username Default is level Default password is super Enable password Ip http server Default Setting Command ModeIp http port Syntax Ip http port port-numberno ip http port Logging on Syntax Ip http server no ip http server Default SettingSyntax Logging on no logging on Default Setting Ip http server Logging history clear logging Logging history Clear logging Flash errors level 3 RAM warnings level 7Snmp-server enable traps snmp-server host Use this command to clear messages from the log buffer Syntax Show logging flash ram Show loggingShow logging Show running-config Show startup-config Show startup-config Show running-config Show users Use this command to display system informationShow system Show version Authentication login Radius Commands Hostipaddress IP address of server Enable password for setting the local passwordRadius-server host Syntax Radius-server key keystring no radius-server key Radius-server portRadius-server key Syntax Radius-server port portnumber no radius-server port Radius-server retransmit Radius-server timeout Show radius-server Snmp Commands Snmp-server community Syntax Snmp-server location text no snmp-server location Snmp-server contactSnmp-server location Syntax Snmp-server contact string no snmp-server contact Snmp-server host Issue all traps Snmp-server enable traps Show snmp Use this command to check the status of Snmp communications Command Usage IP Commands IP address Netmask Interface Configuration VlanIp address Ip dhcp restart Use this command to submit a Bootp or Dchp client request Following example defines a default gateway for this device Ip default-gatewaySyntax Ip default-gateway gateway no ip default-gateway Gateway IP address of the default gateway All interfaces Use this command to display the settings of an IP interfaceShow ip interface Show ip redirects Syntax Ping host size sizecount count This command has no default for the hostPing Interface Line Commands Syntax Line console vty LoginSyntax Login local no login Line Syntax Password 0 7 password no password PasswordLine Configuration Username password CLI No timeout Telnet 10 minutes Exec-timeoutLogin password-thresh Syntax Exec-timeout seconds no exec-timeout Default value is three attempts Password-threshTo set the timeout to 120 seconds, enter this command Syntax Password-thresh threshold no password-thresh Syntax Silent-time seconds no silent-time Default value is no silent-timeTo set the silent time to 60 seconds, enter this command Silent-time Seven data bits per character Eight data bits per character To specify 7 data bits, enter this commandDatabits Syntax Databits 7 8 no databits Syntax Speed bps no speed ParitySpeed Syntax Parity none even odd no parity 9600 bps To specify 57600 bps, enter this commandTo specify 2 stop bits, enter this command Stopbits Syntax Show line console vty Use this command to display the terminal line’s parametersTo show all lines, enter this command Show line Interface Commands Description Interface Following example adds a description to Ethernet port Interface Configuration Ethernet, Port ChannelSpeed-duplex Negotiation no negotiation Negotiation Capabilities Flowcontrol no flowcontrol Flow control enabledFollowing example enables flow control on port Flowcontrol Shutdown Port-channel channel-idRange Default SettingClear counters Packets per second Switchport broadcastFollowing example disables Vdsl port Interface Configuration Ethernet Syntax Show interfaces status interface Use this command to display the status for an interfaceShow interfaces status Show interfaces counters Use this command to display interface statistics Shows all interfaces Show interfaces switchport Bridge address Address Table Commands Action Bridge-group- Bridge group index bridge Show bridge Seconds Clear bridgeBridge-group aging-time Syntax Clear bridge bridge-group Show bridge group aging-time Port security no port security All port security is disabledThis example enables port security for port Port security Spanning Tree Commands Bridge spanning-tree Spanning tree is enabled Bridge forward-time Use this command to configure globally for this switch. Use Bridge hello-time Bridge max-age 32768 Bridge priority Bridge-group path-cost 128 Bridge-group priority Bridge-group portfast Disabled Show bridge group Use this command to show the spanning tree configuration Vlan Commands Vlan database Show vlan By default only Vlan 1 exists and is activeVlan Database Configuration Vlan Syntax Interface vlan vlan-id Interface vlan Configures Vlan membership mode for a port Switchport modeSyntax Switchport mode trunk hybrid no switchport mode All ports are in hybrid mode with the Pvid set to Vlan All frame types Switchport acceptable-frame-typesSwitchport ingress-filtering Switchport mode Switchport native vlan Switchport allowed vlan No VLANs are included in the forbidden list Switchport forbidden vlan Syntax Show vlan id vlan-idname vlan-name Use this command to show Vlan informationFollowing example shows how to display information for Vlan Show vlan Syntax Pvlan Pvlan CommandsFor the two commands Disabled with no Pvlan interfaces Pvlan For the 12-Line Vdsl Switch Show pvlan Syntax Show pvlan Command Mode Gvrp and Bridge Extension Commands 109 Switchport gvrpShow gvrp configuration Syntax Switchport gvrp No switchport gvrp Default Setting 110 Garp timer 111 Show garp timerShow garp timer Shows all Garp timers Bridge-ext gvrp no bridge-ext gvrp Garp timerBridge-ext gvrp 112 113 Show bridge-ext 114 Igmp Snooping Commands 115 Following example enables Igmp snoopingIp igmp snooping Ip igmp snooping vlan static Igmp Version Ip igmp snooping version116 117 Show ip igmp snoopingShow bridge multicast Ip igmp snooping querier no ip igmp snooping querier Ip igmp snooping querier118 119 Following shows how to configure the query count toIp igmp snooping query-count Ip igmp snooping query-interval 120 Seconds The report delay advertised in Igmp queries. RangeIp igmp snooping query-max-response-time Ip igmp snooping version Switch must be using IGMPv2 for this command to take effectIp igmp snooping query-time-out 121 122 No static multicast router ports are configuredIp igmp snooping vlan mrouter Syntax Show ip igmp snooping mrouter vlan vlan-id Displays multicast router ports for all configured VLANsShow ip igmp snooping mrouter 123 124 Priority Commands 125 Switchport priority default 126 Queue bandwidth Show queue bandwidth Queue cos-map127 Show queue cos-map 128 129 Use this command to show the class of service priority mapShow queue bandwidth Show queue cos-map Map ip port no map ip port Map ip port Global Configuration130 Map ip precedence no map ip precedence Map ip port Interface ConfigurationMap ip precedence Global Configuration 131 132 Map ip precedence Interface ConfigurationList below shows the default priority mapping Map ip dscp no map ip dscp Map ip dscp Global Configuration133 134 Map ip dscp Interface Configuration Map ip port Maps CoS values to IP ports i.e., TCP/UDP ports Use this command to show the IP port priority mapShow map ip port 135 Map ip precedence Maps CoS values to IP precedence values Use this command to show the IP precedence priority mapShow map ip precedence 136 Map ip dscp Maps CoS values to IP Dscp values Use this command to show the IP Dscp priority mapShow map ip dscp 137 138 Mirror Port CommandsInterface Configuration Ethernet, destination port Port monitor Show port monitor 139 Syntax Show port monitor interface Show port monitor140 141 Port Trunking Commands Syntax Channel-group channel-idno channel-group Interface port-channelChannel-group 142 143 Use this command to show trunk informationNo default Show interfaces status port-channel Lacp no lacp Lacp144 Following shows information on Trunk 145 146 Vdsl Commands Profile name Name of the profile Efm profile global147 Syntax Efm profile global profile name 148 Syntax Efm profile profile name Efm profile149 Efm profile Efm profile global efm profile Interleaving is disabledEfm define user-profile 150 Efm shutdown Efm resetSyntax Efm reset local remote Use this command to troubleshoot EFM port performance Off Syntax Efm rdl no efm rdl Default SettingEfm rdl 152 Rate-limit global rate-limit Efm flow-control153 Interface-id- ID of the EFM port Show controllers ethernet-controller154 Syntax Show controllers ethernet-controller interface-id Clear controllers ethernet-controller 155 156 Show controllers efm interface-id actual 157 Show controllers efm interface-id adminSyntax Show controllers efm interface-idadmin dsrate usrate Syntax Show controllers efm profile mapping names Show controllers efm profile158 Examples 159 160 Show controllers efm status 161 162 Show controllers efm remote ethernet modeUse this command to display the connected CPE Ethernet mode To obtain the Ethernet mode from CPE side Vdsl chip Rate-limit input no rate-limit input Rate Limit CommandsRate-limit global 163 Rate The rate unit is Mbps Rate-limit interface164 Syntax Rate-limit input rate Troubleshooting Chart Appendix a Troubleshooting Upgrading Firmware via the Serial Port Upgrading Firmware VIA the Serial Port Troubleshooting DB-9 Port Pin Assignments Console Port Pin Assignments Console Port to 25-Pin DTE Port on PC Console Port to 9-Pin DTE Port on PC Auto-negotiation Glossary-11000BASE-T Glossary-2 Glossary-3 Glossary-4 Glossary-5 Glossary-6 Index-1 Index Index-2 Page For Technical SUPPORT, Call