MIRROR PORT COMMANDS

Command Usage

You can mirror traffic from any source port to a destination port for real-time analysis. You can then attach a logic analyzer or RMON probe to the destination port and study the traffic crossing the source port in a completely unobtrusive manner.

The destination port is set by specifying an Ethernet interface.

Example

The following example configures the switch to mirror all packets from port 6 to port 11:

Console(config)#interface ethernet 1/11

Console(config-if)#port monitor ethernet 1/6 both

Console(config-if)#

Related Commands

show port monitor

3-139

Page 275
Image 275
SMC Networks SMC7724M/VSW manual 139, Show port monitor