SMC Networks SMC7724M/VSW manual Enable, Syntax enable level, Default Setting, Command Mode

GENERAL COMMANDS

enable

Use this command to activate Privileged Exec mode. In privileged mode, additional commands are available, and certain commands display additional information. See “Understanding Command Modes” on page 3-7.

Syntax enable [level]

level - Privilege level to log in to the device.

The device has two predefined privilege levels: 0: Normal Exec,

15: Privileged Exec. Enter level 15 to access Privileged Exec mode.

Default Setting

Level 15

Command Mode

Normal Exec

Command Usage

•“super” is the default password required to change the command mode from Normal Exec to Privileged Exec. (To set this password, see the enable password command on page 3-29.)

•The “#” character is appended to the end of the prompt to indicate that the system is in privileged access mode.

•You only need to use Level 15. Setting the password for Level 0 has no effect.

3-13