SMC Networks SMC7724M/VSW manual Address Table Commands, Bridge address

ADDRESS TABLE COMMANDS

Address Table Commands

These commands are used to configure the address table for filtering specified addresses, displaying current entries, clearing the table, or setting the aging time.

Command	Function	Mode	Page
bridge address	Maps a static address to a port in a VLAN	GC	3-79
show bridge	Displays classes of entries in the	PE	3-81
	bridge-forwarding database
clear bridge	Removes any learned entries from the	PE	3-82
	forwarding database and clears the transmit
	and receive counts for any statically or system
	configured entries
bridge-group	Sets the aging time of the address table	GC	3-82
aging-time
show bridge	Shows the aging time for the address table	PE	3-83
aging-time

Note: The access mode shown in the table is indicated by these abbreviations: NE (Normal Exec), PE (Privileged Exec), GC (Global Configuration), IC (Interface Configuration),

LC (Line Configuration), VC (VLAN Database Configuration.)

bridge address

Use this command to map a static address to a port in a VLAN. Use the no form to remove an address.

Syntax

bridge bridge-group address mac-address vlan vlan-id forward interface [action]

no bridge bridge-group address mac-address vlan vlan-id

3-79