SMC Networks SMC7724M/VSW manual To start the new firmware, reboot the system

CONFIGURING THE SWITCH

To start the new firmware, reboot the system.

Command Line Interface

Enter the IP address of the TFTP server. Select the config or opcode file type. Enter the source and destination file names. Set the new file to boot the system.

Console#copy tftp file		3-19
TFTP server	ip address: 10.1.0.15
Choose file	type:
1. config:	2. opcode: <1-2>: 2
Source file	name: vdsl(v1.8.1.1ZZ.bix
Destination	file name: v1811zz.bix
/
Console#config
Console(config)#boot system opcode: v1811zz.bix		3-25
Console(config)#exit
Console#reload		3-16

To start the new firmware, enter the “reload” command or reboot the system.

Saving or Restoring Configuration Settings

You can upload/download configuration settings to/from a TFTP server. The configuration file can be later downloaded to restore the switch’s settings.

Command Usage

•The destination configuration file name should not contain slashes (\ or /), the leading letter of the file name should not be a period (.), and

2-18