SMC Networks SMC7724M/VSW manual Command Groups, Command Description Group

COMMAND LINE INTERFACE

Command Groups

The system commands can be broken down into the functional groups shown below.

Command	Description	Page
Group
General	Basic commands for entering privileged access	3-12
	mode, restarting the system, or quitting the CLI
Flash/File	Manages code image or switch configuration files	3-19
System	Controls system logs, system passwords, user name,	3-26
Management	browser management options, and a variety of other
	system information
Radius Client	Configures RADIUS client-server authentication for	3-39
	logon access
SNMP	Activates authentication failure traps; configures	3-44
	community access strings, and trap managers
IP	Configures the IP address and gateway for	3-51
	management access, DHCP server and relay service
	for server blades, displays the default gateway, or
	pings a specified device
Interface	Configures the connection parameters for all	3-68
	Ethernet ports, aggregated links, and VLANs
Address Table	Configures the address table for filtering specified	3-79
	addresses, displaying current entries, clearing the
	table, or setting the aging time
Port Security	Configures secure addresses for a port	3-84
Spanning Tree	Configures Spanning Tree settings for the switch	3-85
VLAN	Configures VLAN settings, and defines port	3-95
	membership for VLAN groups
PVLAN	Enables or configures Private VLAN	3-105
GVRP and	Configures GVRP settings that permit automatic	3-105
Bridge Extension	VLAN learning; shows the configuration for bridge
	extension MIB
IGMP Snooping	Configures IGMP multicast filtering, querier	3-114
	eligibility, query parameters, and specifies ports
	attached to a multicast router

3-10