SMC Networks SMC7724M/VSW manual Bridge max-age

SPANNING TREE COMMANDS

bridge max-age

Use this command to configure the spanning tree bridge maximum age globally for this switch. Use the no form to restore the default.

Syntax

bridge bridge-group max-ageseconds no bridge bridge-group max-age

•bridge-group- Bridge group index (bridge 1.)

•seconds - Time in seconds. (Range: 6-40 seconds)

•The minimum value is the higher of 6 or [2 x (hello-time + 1)].

•The maximum value is the lower of 40 or [2 x (forward-time - 1)].

Default Setting

20 seconds

Command Mode

Global Configuration

Command Usage

This command sets the maximum time (in seconds) a device can wait without receiving a configuration message before attempting to reconfigure. All device ports (except for designated ports) should receive configuration messages at regular intervals. Any port that ages out STA information (provided in the last configuration message) becomes the designated port for the attached LAN. If it is a root port, a new root port is selected from among the device ports attached to the network.

Example

Console(config)#bridge 1 max-age 40

Console(config)#

3-89