SMC Networks SMC7724M/VSW manual Vlan Commands

VLAN COMMANDS

VLAN Commands

A VLAN is a group of ports that may be located anywhere in the network, but communicate as though they belong to the same physical segment. This section describes commands used to create VLAN groups, add port members, specify how VLAN tagging is used, and enable automatic VLAN registration for the selected interface.

Command	Function	Mode	Page
Edit VLAN Groups
vlan database	Enters VLAN database mode to add,	GC	3-95
	change, and delete VLANs
vlan	Configures a VLAN, including VID, name	VC	3-97
	and state
Configure VLAN Interfaces
interface vlan	Enters interface configuration mode for	IC	3-98
	specified VLAN
switchport mode	Configures VLAN membership mode for	IC	3-99
	an interface
switchport	Configures frame types to be accepted by	IC	3-100
acceptable-frame-	an interface
types
swicthport	Enables ingress filtering on an interface	IC	3-100
ingress-filtering
switchport native	Configures the PVID (native VLAN) of an	IC	3-101
vlan	interface
switchport allowed	Configures the VLANs associated with an	IC	3-102
vlan	interface
switchport gvrp	Enables GVRP for an interface	IC	3-108
switchport	Configures forbidden VLANs for an	IC	3-103
forbidden vlan	interface

3-95