SMC Networks SMC7724M/VSW manual Show garp timer, 111, Shows all Garp timers

GVRP AND BRIDGE EXTENSION COMMANDS

•Timer values must meet the following restrictions:

-leave >= (2 x join)

-leaveall > leave

Note: Set GVRP timers on all Layer 2 devices connected in the same network to the same values. Otherwise, GVRP will not operate successfully.

Example

Console(config)#interface ethernet 1/1

Console(config-if)#garp timer join 100

Console(config-if)#

Related Commands

show garp timer

show garp timer

Use this command to show the GARP timers for the selected interface.

Syntax

show garp timer [interface] interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

•port-channel channel-id(Range: 1-6)

Default Setting

Shows all GARP timers.

Command Mode

Normal Exec, Privileged Exec

3-111