SMC Networks SMC7724M/VSW Stopbits, 9600 bps, To specify 57600 bps, enter this command, Stop bit

COMMAND LINE INTERFACE

Default Setting

9600 bps

Command Mode

Line Configuration

Command Usage

Set the speed to match the baud rate of the device connected to the serial port. Some baud rates available on devices connected to the port might not be supported. The system indicates if the speed you selected is not supported.

Example

To specify 57600 bps, enter this command:

Console(config-line)#speed 57600

Console(config-line)#

stopbits

Use this command to set the number of the stop bits transmitted per byte. Use the no form to restore the default setting.

•1 - One stop bit

•2 - Two stop bits

Default Setting

1 stop bit

Command Mode

Line Configuration

Example

To specify 2 stop bits, enter this command:

Console(config-line)#stopbits 2

Console(config-line)#

3-66