F
LASH
/F
ILE

C

OMMANDS

3-19

Flash/File Commands
These commands are used to manage the system code or configuration
files.
Note: The access mode shown in the table is indicated by these
abbreviations: NE(Normal Exec), PE (Privileged Exec),
GC(Glo bal Configuration), IC (Interface Configuration),
LC(L ine Configuration), VC (VLAN Database Configuration.)

copy

Use this command to copy (upload/download) a code image or
configuration file between the switch's Flash memory and a TFTP ser ver.
When you save the system code or configuration settings to a file on a
TFTP server, that file can later be downloaded to the switch to restore
system operation. The success of the file transfer depends on the
accessibility of the TFTP server and the quality of the network connection.
Command Function Mode Page
copy Copies a code image or a switch
configuration to or from Flash memory or a
TFTP server
PE 3-19
delete Deletes a file or code image PE 3-22
dir Displays a list of files in Flash memory PE 3-23
whichboot Displays the files booted PE 3-24
boot system Specifies the file or image used to start up the
system
GC 3-25