SMC Networks SMC7724M/VSW Line Commands, LC Line Configuration, VC Vlan Database Configuration

COMMAND LINE INTERFACE

Line Commands

Access the on-board configuration program by attaching a VT100 compatible device to the server’s serial port. These commands are used to set communication parameters for the serial port or Telnet (i.e., a virtual terminal.)

Command	Function	Mode	Page
line	Identifies a specific line for configuration	GC	3-59
	and starts the line configuration mode
login	Enables password checking at login	LC	3-59
password	Specifies a password on a line	LC	3-60
exec-timeout	Sets the interval with no user input after	LC	3-61
	which the current session will be terminated
password-thresh	Sets the password intrusion threshold,	LC	3-62
	which limits the number of failed logon
	attempts
silent-time	Sets the amount of time the management	LC	3-63
	console is inaccessible after the number of
	unsuccessful logon attempts exceeds the
	threshold set by the password-thresh
	command
databits	Sets the number of data bits per character	LC	3-64
	that are interpreted and generated by
	hardware
parity	Defines the generation of a parity bit	LC	3-65
speed	Sets the terminal baud rate	LC	3-65
stopbits	Sets the number of the stop bits transmitted	LC	3-66
	per byte
show line	Displays a terminal line's parameters	NE,	3-67
		PE

Note: The access mode shown in the table is indicated by these abbreviations: NE (Normal Exec), PE (Privileged Exec), GC (Global Configuration), IC (Interface Configuration),

LC (Line Configuration), VC (VLAN Database Configuration.)

3-58