SMC Networks SMC7724M/VSW manual 163

CONFIGURING THE SWITCH

Web Interface

Click Rate Limit/Rate Limit Status to enable/disable this feature globally. Then click Rate Limit Port Configuration or Rate Limit Trunk Configuration to configure the rate limit for individual ports or trunks.

Command Line Interface

Use the rate-limit input command in Global configuration mode to turn on rate limit. Use the no form of this command to disable it.

Console#config
Console(config)#rate-limit input	3-163
Console(config)#

Use the rate limit input command in Interface Configuration mode to configure the rate limit on data received on a specific port. Use the no form of this command to return to default. In the example below, port 1 is configured to have a rate limit of 10 Mbps.

Console(config)#interface ethernet 1/1
Console(config-if)#rate-limit input 10	3-164
Console(config-if)#

2-96