SMC Networks SMC7724M/VSW manual 155, Clear controllers ethernet-controller

VDSL COMMANDS

Command Usage

Using this command without specifying a VDSL port displays the Ethernet link statistics of all ports on the switch and on the connected CPE devices. The output shows the statistics collected by the VDSL chipset on the switch, and the statistics collected by the VDSL chipset on the CPE.

Example

The following example resets the switch and CPE side VDSL chipset of VDSL port 1

Console#show controllers ethernet-controller ethernet 1/2 Ethernet 1/2 :

efm PHY on	Switch:
Transmit
0	Bytes Transmitted
0	Frames Transmitted
0	Pause frames
0	Single Collision Frames
0	Multiple collisions
0	Late collisions
0	Excessive collisions
0	Deferred frames
0	Carrier sense errors
Receive
0	Bytes Received
0	Frames Received
0	Broadcast frames
0	Pause frames
0	Alignment errors
0	Collisions and Runts
0	Oversize frames
0	FCS errors
efm MAC on	CPE:

Related Commands

clear controllers ethernet-controller

3-155