SMC Networks SMC7724M/VSW manual Creating VLANs, This example creates a new Vlan

CONFIGURING THE SWITCH

Creating VLANs

Use the VLAN Static List to create or remove VLAN groups. To propagate information about VLAN groups used on this switch to external network devices, you must specify a VLAN ID for each of these groups.

Fields and Attributes

•VLAN ID – ID of configured VLAN (1-4094, no leading zeroes.)

•VLAN Name – Name of the VLAN (1 to 32 characters.)

•Status – Shows if this VLAN is enabled or disabled (Web.)

•Enable - VLAN is operational.

•Disable - VLAN is suspended; i.e., does not pass packets.

•State – Shows if this VLAN is enabled or disabled (CLI.)

•Active - VLAN is operational.

•Suspend - VLAN is suspended; i.e., does not pass packets.

Web Interface

Click VLAN/VLAN Static List. Enter the VLAN ID and VLAN name, check the Enable box to activate the VLAN, and then click “Add.”

Command Line Interface

This example creates a new VLAN.

Console(config)#vlan database	3-95
Console(config-vlan)#vlan 5 name R&D media ethernet state active	3-97
Console(config-vlan)#

2-52