SMC Networks SMC7724M/VSW manual Adding Interfaces Based on Static Membership

CREATING VLANS

Adding Interfaces Based on Static Membership

Fields and Attributes

•Interface – Port or trunk identifier.

•Member – VLANs for which the selected interface is a tagged member.

•Non-Member – VLANs for which the selected interface is not a tagged member.

Web Interface

Click VLAN/VLAN Static Membership. Select an interface from the scroll-down box (Port or Trunk.) Click “Query” to display VLAN membership information for the interface. Select a VLAN ID, and then click “Add” to add the interface as a tagged member, or click “Remove” to remove the interface. After configuring VLAN membership for each interface, click “Apply.”

Command Line Interface

This example adds Port 3 to VLAN 1 as a tagged port, and removes Port 3 from VLAN 2.

Console(config)#interface ethernet 1/3			3-69
Console(config-if)#switchport	allowed	vlan add 1 tagged	3-102
Console(config-if)#switchport	allowed	vlan remove 2

2-55