SMC Networks SMC7724M/VSW manual Rate-limit interface, 164, Syntax Rate-limit input rate

COMMAND LINE INTERFACE

rate-limit (interface)

Use this command in Interface Configuration mode to configure the rate limit on data received on a specific port. Use the no form of this command to return to the default settings. Note that the maximum data rate for VDSL ports depends on the physical link and the selected efm profile (see page 3-147.)

Syntax

rate-limit input rate

rate – The rate unit is Mbps

Default Setting

Fast Ethernet interface – 100 Mbps

Gigabit Ethernet interface – 1000 Mbps

Command Mode

Interface Configuration

Command Usage

•The rate range is:

-Fast Ethernet interface – 1 to 100 Mbps.

-Gigabit Ethernet interface – 1 to 1000 Mbps.

•Resolution – the unit increment of rate change:

-Fast Ethernet interface – 1 Mbps.

-Gigabit Ethernet interface – 8 Mbps

Example

Console(config)#interface ethernet 1/1

Console(config-if)#rate-limit input 10

Console(config-if)#

3-164