SMC Networks SMC7724M/VSW manual Specifying Trap Managers, Command Usage

CONFIGURING SNMP

Specifying Trap Managers

You can specify up to five management stations that will receive authentication failure messages and other trap messages from the switch.

Command Usage

•Enable or disable authentication messages via the Web Interface.

•Enable or disable authentication messages, link-up-down messages, or all notification types via the CLI.

Web Interface

Click SNMP/Traps. Fill in the Trap Manager IP Address box and the Trap Manager Community String box, check Enable Authentication Traps if required, and then click “Add.”

Command Line Interface

This example adds a trap manager and enables authentication traps.

Console(config)#snmp-server	host 10.1.19.23 batman	3-47
Console(config)#snmp-server	enable traps authentication	3-48

2-83