SMC Networks SMC7724M/VSW manual Map ip port Interface Configuration, 131

PRIORITY COMMANDS

map ip port (Interface Configuration)

Use this command to set IP port priority (i.e., TCP/UDP port priority.) Use the no form to remove a specific setting.

Syntax

map ip port port-number cos cos-value no map ip port port-number

•port-number- 16-bit TCP/UDP port number. (Range: 0-65535)

•cos-value- Class-of-Service value (Range: 0-7)

Default Setting

None

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.

Example

The following example shows how to map HTTP traffic to CoS value 0:

Console(config)#interface ethernet 1/5

Console(config-if)#map ip port 80 cos 0

Console(config-if)#

map ip precedence (Global Configuration)

Use this command to enable IP precedence mapping (i.e., IP Type of Service.) Use the no form to disable IP precedence mapping.

Syntax

map ip precedence no map ip precedence

Default Setting

Disabled

Command Mode

Global Configuration

3-131