SMC Networks SMC7724M/VSW manual Switchport native vlan, Disabled

VLAN COMMANDS

Default Setting

Disabled

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•If ingress filtering is enabled, incoming frames for VLANs which do not include this ingress port in their member set will be discarded at the ingress port.

•Ingress filtering does not affect VLAN independent BPDU frames, such as GVRP or STP. However, they do affect VLAN dependent BPDU frames, such as GMRP.

Example

The following example shows how to set the interface to port 1 and then enable ingress filtering:

Console(config)#interface ethernet 1/1

Console(config-if)#switchport ingress-filtering

Console(config-if)#

switchport native vlan

Use this command to configure the PVID (i.e., default VID) for a port. Use the no form to restore the default.

Syntax

switchport native vlan vlan-idno switchport native vlan

vlan-id- Default VLAN ID for a port. (Range: 1-4094, no leading zeroes)

Default Setting

VLAN 1

Command Mode

Interface Configuration (Ethernet, Port Channel)

3-101