SMC Networks SMC7724M/VSW manual 148, Command Usage

COMMAND LINE INTERFACE

Command Usage

Assigns the same profile to each VDSL switch port. Details of these profiles are given in the table below:

Profile Name	Profile Type	Downstream Rate	Upstream Rate
		(Mbps)	(Mbps)
default	Private	4.17	1.56
efm-5	Private	6.25	6.25
efm-10	Private	12.50	12.50
efm-15	Private	16.67	18.75
public-ansi	Public	16.67	4.67
public-etsi	Public	12.50	4.67
efm-5 LL	Private	6.25	6.25
efm-10 LL	Private	12.50	12.50
efm-15 LL	Private	16.67	18.75
public-ansiLL	Public	16.67	4.67
public-etsiLL	Public	12.50	4.67
efm-15-3LL	Private	16.67	3.13
efm-15-2LL	Private	16.67	2.08
efm-15-1LL	Private	16.67	1.56
efm-10-2 LL	Private	12.50	2.08
user-1	Private	4.00	1.00
user-2	Private	4.00	1.00

Notes: 1. The actual data rates may be somewhat less than those shown in the table above depending on the protocols/applications used.

2.If the “LL” type profile is selected, the error rate due to noise in transmission is increased but the signal latency is reduced.

3.The “Public” profiles conform to specific standards such as ANSI or ETSI. The “Private” profiles do not conform to these standards.

4.Profiles “user-1” and “user-2” are user-configured profiles. The values shown for the downstream and upstream rates are

3-148