SMC Networks SMC7724M/VSW manual Igmp Snooping Commands, 114

COMMAND LINE INTERFACE

IGMP Snooping Commands

This switch uses IGMP (Internet Group Management Protocol) to query for any attached hosts that want to receive a specific multicast service. It identifies the ports containing hosts requesting a service and sends data out to those ports only. It then propagates the service request up to any neighboring multicast switch/router to ensure that it will continue to receive the multicast service.

Command	Function	Mode	Page
Basic IGMP Commands
ip igmp snooping	Enables IGMP snooping	GC	3-115
ip igmp snooping vlan	Adds an interface as a member of a	GC	3-115
static	multicast group
ip igmp snooping	Configures the IGMP version for	GC	3-116
version	snooping
show ip igmp snooping	Shows the IGMP snooping	PE	3-117
	configuration
show bridge multicast	Shows the IGMP snooping MAC	PE	3-117
	multicast list
IGMP Querier Commands
ip igmp snooping	Allows this device to act as the querier	GC	3-118
querier	for IGMP snooping
ip igmp snooping	Configures the query count	GC	3-119
query-count
ip igmp snooping	Configures the query interval	GC	3-119
query-interval
ip igmp snooping	Configures the report delay	GC	3-120
query-max-response-ti
me
ip igmp snooping	Configures the query timeout	GC	3-121
query-time-out
show ip igmp snooping	Shows the IGMP snooping	PE	3-117
	configuration

3-114