SMC Networks SMC7724M/VSW manual Command Usage, Downloading System Software from a Server

BASIC CONFIGURATION

Command Usage

•The destination file name should not contain slashes (\ or /), the leading letter of the file name should not be a period (.), and the length of the file name should be 1 to 31 characters. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)

•The maximum number of runtime files is 2.

Downloading System Software from a Server

When downloading runtime code, specify the same Destination File Name as the current file to replace the current code file, or first download the file using a different name from the current runtime code file, and then set the new file as the startup file.

Web Interface

Click System/Firmware. Enter the IP address of the TFTP server, enter the file name of the software to download, select a file on the switch to overwrite or specify a new file name, then click “Transfer from Server.”

If you download to a new destination file, select the new file from the “Start-Up Operation Code Image File” drop-down box, and click “Apply Changes.”

2-17