iDP3221 User’s Manual
GS | B | n |
[Function] | Specifying/Canceling the black/white inverted printing | |
[Code] | <1D>H<42>H<n> | |
[Range] | 0 ≤ n ≤ 255 | |
[Outline] | This command specifies or cancels the black/white inverted printing. | |
|
| • If n = <*******0>B, the black/white inverted printing is canceled. |
|
| • If n = <*******1>B, the black/white inverted printing is specified. |
[Caution] | • Number "n" is only valid in the lowest bit. | |
|
| • The black/white inversion works on internal and downloaded characters. |
|
| • The black/white inversion works also on the right spacing of characters defined by ESP SP. |
|
| • This command does not affect the bit image, downloaded bit image, bar code, HRI |
|
| characters, or the skip area specified by HT, ESC $, or ESC ¥. |
|
| • This command does not affect the space between lines. |
|
| • Black/white inversion specification take precedence over underline specification. Underline |
|
| printing due to underline specification is, therefore, nullified if black/white inversion is |
|
| specified; the underline setting, however, remains unchanged. |
[Default] | n = 0 | |
88 | CITIZEN |
