iDP3221 User’s Manual
ESC | p | m n1 | n2 |
[Function] | Generating the specified pulses | ||
[Code] |
| <1B>H<70>H<m><n1><n2> | |
[Range] | m = 0, 1 |
| |
|
| 0 < n1 ≤ n2 ≤ 255 | |
[Outline] | The signals specified by "n1" and "n2" are output to the connector pin specified by "m". |
• "m" has the followings.
m
0
1
Connector Pin
Drawer kick pin No.2
Drawer kick pin No.5
| • The ON time is n1 ⋅2 ms, and OFF time n2⋅2 ms. | ||
[Caution] | • When "m" is beyond a definition range, no signal is output, discarding "n1" and "n2." | ||
| • A drawer drive duty is as follows. | ||
|
| ON time | ≤ 0.2 |
|
|
| |
|
| ON time + OFF time | |
|
|
| |
|
| (The OFF time should be 4 times or more larger than the ON time.) | |
[Default] | The initial value for "m", "n1" and "n2" is not defined. |
[Sample Program]
LPRINT CHR$ (&H1B) + "p"
LPRINT CHR$ (0) ; ••••••• Selects pin No. 2.
LPRINT CHR$ (5) ; ••••••• Sets ON time to 10ms
LPRINT CHR$ (50) ; ••••••• Sets OFF time to 100ms
END
78 | CITIZEN |