iDP3221 User’s Manual

GS

P

x

y

 

 

[Function]

 

Specifying the basic calculation pitch

[Code]

 

<1D>H<50>H<x><y>

 

[Range]

 

0 x 255

 

 

 

 

0 y 255

 

[Outline]

 

This command sets the horizontal basic calculation pitch to approx. 25.4/x mm (1/x inches),

 

 

 

and the vertical basic calculation pitch to approx. 25.4/y mm (1/y inches).

 

 

 

• If x = 0, the horizontal basic calculation pitch is reverted to the default value.

 

 

 

• If y = 0, the vertical basic calculation pitch is reverted to the default value.

[Caution]

 

• The horizontal direction is defined as the direction perpendicular to the paper feed, and the

 

 

 

vertical direction is defined as the paper feed direction.

 

 

 

• In Standard mode, the following parameters are used regardless of the character orientation

 

 

 

(e.g. inverted or turned 90°-right-turned).

 

 

 

(1) Commands using x: ESC SP, ESC S, ESC ¥, GS L, GS W

 

 

 

(2) Commands using y: ESC 3, ESC J

 

 

 

• In Page mode, the parameters used depend on the character orientation; as follows:

 

 

 

(1)

If the start point specified by ESC T is the top left or bottom right (the characters are

 

 

 

 

mapped in the direction perpendicular to the paper feed).

 

 

 

 

•Commands using x:

ESC SP, ESC $, ESC W, ESC ¥

 

 

 

 

•Commands using y:

ESC 3, ESC J, ESC W, GC S,GS ¥

 

 

 

(2)

If the start point specified by ESC T is the top right or bottom left (the characters are

 

 

 

 

mapped in the paper feed direction).

 

 

 

 

•Commands using x:

ESC 3, ESC J, ESC W, GC S,GS ¥

 

 

 

 

•Commands using y:

ESC SP, ESC $, ESC W, ESC ¥

 

 

 

• This command does not affect any other values that are already set.

 

 

 

• If calculations made for a combination with another command generate fractions, the

 

 

 

fractions are corrected with the minimum pitch of the mechanism, and the remainder is

 

 

 

omitted.

 

[Default]

 

x = 180, y = 360

 

[See Also]

 

"Page Mode" in Appendix 1

 

 

 

 

ESC SP, ESC $, ESC 3, ESC J, ESC W, ESC ¥, GS $, GS L, GS W, GS ¥

92

CITIZEN

Page 108
Image 108
Citizen iDP3221 manual Esc Sp, Esc $, Esc W, Esc ¥, ESC 3, ESC J, ESC W, GC S,GS ¥