Citizen iDP3221 manual After n1 is processed as normal printing data

iDP3221 User’s Manual

ESC	*	m	n1		n2	[ d ]		k
[Function]		Specifying the bit image mode
[Code]		<1B> H <2A> H <m> <n1> <n2> [<d>] k
[Range]		m= 0, 1, 32, 33
		0	≤ n1	≤ 255
		0	≤ n2	≤ 3
		0	≤ d ≤ 255
		k = n1		+ 256 ⋅ n2			(m = 0, 1)
		k = (n1+ 256 ⋅ n2) ⋅ 3					(m = 32, 33)
[Outline]		According to the number of dots specified in "n1," "n2," specify the bit image of mode "m."
		• The number of dots printed is divided by 256, whose quotient is taken as n2 and residual
			as "n1."

•The total number. of dots printed in the bit image is equal to n1 + (256 ⋅ n2).

•When bit image data have been input in excess of dot position of one line, the excess data are discarded.

•"d" is bit image data, the bits subject to printing are taken as "1" and those not as "0".

•The bit image modes specified by m are shown as follows:

m	Mode	Vertical Direction		Horizontal Direction
		No. of Dots	Dot Density	Dot Density	Max. No. of Dots
0	8-dot single density	8	60 DPI	90 DPI	n1 + n2⋅256
1	8-dot double density	8	60 DPI	180 DPI	n1 + n2⋅256
32	24-dots single density	24	203 DPI	90 DPI	(n1+n2⋅256)⋅3
33	24-dots double density	24	203 DPI	180 DPI	(n1+n2⋅256)⋅3

[Caution]	• When the values set in m (Bit image mode) are out of the above range, the data following
	after n1 is processed as normal printing data.
	• After completion of bit image printing, printer returns to normal data processing mode.
[Example]

54 CITIZEN