iDP3221 User’s Manual
ESC | T | n |
|
|
| |
[Function] |
| Selecting the character printing direction in Page mode |
| |||
[Code] |
|
| <1B>H<54>H<n> |
|
| |
[Range] |
| 0 ≤ n ≤ 3, 48 ≤ n ≤ 51 |
|
| ||
[Outline] |
| Selects the direction and start position of character printing in Page mode. |
| |||
|
|
|
|
|
|
|
|
|
| n | Printing direction | Start point |
|
|
|
| 0,48 | Left to right | Top left ("A" in the figure) |
|
|
|
| 1,49 | Bottom to top | Bottom left ("B" in the figure) |
|
|
|
| 2,50 | Right to left | Bottom right ("C" in the figure) |
|
|
|
| 3,51 | Top to bottom | Top right ("D" in the figure) |
|
Paper Feed Direction
Print Area
[Caution] | • When Standard mode is selected, this command only executes the internal flagging of the |
| printer without affecting the printing in Standard mode. |
| • The character mapping position will be the start position in the print area specified by ESC |
| W. |
| • The basic pitch (x or y) used by the following commands varies with the start point. |
(1)If the start point is the top left or bottom right (the characters are mapped in the direction perpendicular to the paper feed).
• Commands using x: | ESC SP, ESC S, ESC ¥ |
• Commands using y: | ESC 3, ESC J, GS S, GS ¥ |
(2)If the start point is the top right or bottom left (the characters are mapped in the paper feed direction).
| • Commands using x: | ESC 3, ESC J, GS S, GS ¥ |
| • Commands using y: | ESC SP, ESC S, ESC ¥ |
[Default] | n = 0 |
|
[See Also] | "Page Mode" in Appendix 1 |
|
| ESC $, ESC L, ESC W, ESC ¥, GS $, GS P, GS ¥ | |
68 | CITIZEN |
