iDP3221 User’s Manual
ESC | L |
|
|
|
|
[Function] | Selecting Page mode |
|
| ||
[Code] |
| <1B>H<4C>H<n> |
|
| |
[Outline] | Switches from Standard mode to Page mode. | ||||
[Caution] | • This command is only effective if it entered at the beginning of a line. | ||||
|
| • This command is not effective if it is entered when in Page mode. | |||
|
| • Standard mode is restored when printing specified by FF is finished or when ESC S is | |||
|
| issued. |
|
| |
|
| • The character mapping start position will be the point specified by ESC T in the print area | |||
|
| specified by ESC W. |
|
| |
|
| • The commands listed below, which have separate settings for Page mode and Standard | |||
|
| mode, are changed to the settings for Page mode use. | |||
|
| (1) | Spacing setting: | ESC SP |
|
|
| (2) | Line feed width setting: | ESC 2, ESC 3 | |
•In Page mode, the following commands can only be set.
(1)ESC V Specifying/changing to
(2)ESC a Aligning the characters.
(3)ESC { Specifying/canceling the inverted characters.
(4)GS L Setting the left margin.
(5)GW W Setting the print area width.
ESC @ restores Standard mode.
[See Also] "Page Mode" in Appendix 1
FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS S, GS ¥
65 | CITIZEN |
