←(Return the line feed width to 1/6 inch)
iDP3221 User’s Manual
<Example: When printing a downloaded bitmap image covering six bytes vertically >
[Vertically mapped dots (= 8⋅6) Line feed width for the starting point (= 21)]⋅(Vertical basic calculation pitch conversion ratio (= 360/180) = 54
54 pitches, or 27 dots, must, therefore, be added to the line feed width. ESC W, xL, xH, yL, yH, dxL, dxH, dyL, dyH
ESC Tn
ESC 3 54 ←(Additional line feed width)
LF
GS/1
ESC2
Note: Because the default of the basic calculated pitch is 1/180 for the horizontal direction and 1/360 for the vertical direction, some error can occur, such as position specification, depending on the print direction. No error occurs if the basic calculated pitch for the vertical direction is set to 1/180 by the GSP command.
122 | CITIZEN |
