Citizen iDP3221 manual Esc Nul

iDP3221 User’s Manual

ESC	D	[ n ]	k	NUL
[Function]		Setting horizontal tab position
[Code]		<1B> H <44> H [<n>] k <00> H
[Range]		1 ≤ n ≤ 255
		0 ≤ k ≤ 32
[Outline]		Specifying a horizontal tab position.
		• "n" indicates the number of columns from the beginning to the horizontal tab position. At
		this time, "n= set position− 1" is to be specified. For example, to set the position at 9th
		column, n=8 is to be specified.
		• "k" denotes the number of horizontal tab positions you want to set.
		• The tab position is set at position where it is "character width ⋅n" from the line beginning.
		The character width, at this time, includes the rightward space amount. In double wide
		characters, it is made double of the ordinary case.
		• Tab positions can be specified are maximum 32. Specifying exceeding this is ignored.
		• <n> k, which denotes a setting position, is input in the increasing order and ends at <00> H.
		• ESC D NUL clears all the set tab positions. Following clearing, horizontal tab command
		is ignored.
[Caution]		When the data, <n> k, is equal to or smaller than its preceding data, <n> k-1, it is assumed
		that tab setting is finished. If this is the case, the next data onward will be processed as
		normal data.
		When the data, <n> k, exceeds a 1-line print area, set the horizontal tab position, assuming
		"Set digit position = Maximum print digits + 1." The horizontal tab position does not
		change even if the character width is altered after setting the horizontal tab position.
[Default]		• Initial value is specified for each eight characters (9th., 17th., 25th. columns) of Font A.
[See Also]		HT
[Sample Program]				[Print Results]
		See Sample Program and Print Results for HT on page 40.

61 CITIZEN