iDP3221 User’s Manual
4.7Unlocking the Cutter
1.Remove the paper from the paper passage as described in 4.6 "Eliminating the Paper Jam."
2.Turn on the power. The auto cutter initialization begins and the cutter returns to its home position. Then, the alarm is cleared.
3.If the cutter does not return to its home position after the power has been turned on, do the following. Turn off the power, and return the auto cutter blade to its home position by turning the emergency knob on the bottom of the auto cutter in the direction indicated by the arrow, using tweezers, screwdrivers, etc.
4.With tweezers or similar, totally remove remaining paper from the cutter blade area.
CAUTION:
•Do not carry out this work just after printing because the printing head is very hot.
•When eliminating remaining paper, do not touch the heating surface of the head with a bare hand or metal piece.
•The cutter is enabled/disabled with the DIP switch. When using the printer with the cutter disabled, be sure that the cutter has returned to the home position. If it is not, return it to the home position by turning the emergency knob on the bottom of the printer.
Emergency Knob
16 | CITIZEN |
