Connecting Interface Cable | Citizen iDP3221 manual

iDP3221 User’s Manual

4.2Connecting Interface Cable

1.Turn off the power. (Mating side included)

2.Check the top and bottom of cable terminals, and connect to the interface connector.

3.	Fix the cable terminals.	Serial interface	: Tighten screws, to fix it.
		Parallel interface	: Turn clamps, to fix it.
4.	Connect the cable to the host computer.

Serial Interface Cable	Serial Interface Connector

Parallel Interface Connector

Clamp

Parallel Interface Cable

1.Turn off the power.

2.Check the top and bottom of the drawer kick-out cable connector and connect it to the drawer kick-out connector located on the back of the printer.

3.Screw the grounding cable of the drawer to the grounding terminal of the printer.

CAUTION:

•Connect only the prescribed drawer (Solenoid) to the drawer kick-out connector. (Do not connect a telephone line.)

Drawer Kick-Out Connector

Drawer Kick-Out Cable Connector

Grounding Cable