Citizen iDP3221 manual Double

iDP3221 User’s Manual

GS	!	n
[Function]		Specifying the character size
[Code]		<1D>H<21>H<n>
[Range]		0 ≤ n ≤ 255, where:
		1 ≤ vertical magnification ≤ 8, and 1 ≤ horizontal magnification ≤ 8
[Outline]		Specifies the character size (vertical and horizontal magnification).
			Bit	Meaning		Value
					Hex. Number		Decimal Number
			0
			1	Vertical magnification	See Table 2, "Vertical Magnification"
			2	specification
			3
			4
			5	Horizontal magnification	See Table 1, "Horizontal Magnification"
			6	specification
			7

Table 1 Horizontal Magnification

Hex.	Decimal	Magnification
00	0	1⋅(standard)
10	16	2⋅(horizontal
		double)
20	32	3⋅
30	48	4⋅
40	64	5⋅
50	80	6⋅
60	96	7⋅
70	112	8⋅

Table 2 Vertical Magnification

Hex.	Decimal	Magnification
00	0	1⋅(standard)
01	1	2⋅(vertical
		double)
02	2	3⋅
03	3	4⋅
04	4	5⋅
05	5	6⋅
06	6	7⋅
07	7	8⋅

[Caution]	• This command works for all alphanumeric characters except for HRI characters.
	• This command is ignored if either the vertical magnification or horizontal magnification is
	out of range.
	• In Standard mode, the vertical direction is defined as the paper feed direction, and the
	horizontal direction is defined as the direction perpendicular to the paper feed. These
	definitions are, therefore, interchanged when 90°-right-turned characters are specified.
	• In Page mode, the vertical direction means the top-bottom direction of each character.
	The horizontal direction means the side-to-side direction of each character.

81 CITIZEN