iDP3221 User’s Manual
ESC | W | xL | xH | yL | yH | dxL | dxH | dyL | dyH |
|
|
|
|
| |||||
[Function] | Defining the print area in Page mode |
|
|
| |||||
[Code] |
| <1B>H<57>H<xH><yH><dxL><dxH><dyL><dyH> |
|
| |||||
[Range] | 0 ≤ xL, xH, yL, yH, dxL, dxH, dyL, dyH ≤ 255, except for dxL = dxH = 0 or dyL = dyH = 0 | ||||||||
[Outline] | Defines the location and size of the print area. |
|
| ||||||
|
| • Horizontal start point = [(xL + xH ( 256) ( basic calculation pitch] inches | |||||||
|
| • Vertical start point = [(yL + yH ( 256) ( basic calculation pitch] inches | |||||||
|
| • Horizontal length = [(dxL + dxH ( 256) ( basic calculation pitch] inches | |||||||
|
| • Vertical length = [(dyL + dyH ( 256) ( basic calculation pitch] inches | |||||||
[Caution] | • When Standard mode is selected, this command only executes the internal flagging of the | ||||||||
printer without affecting the printing in Standard mode.
• If the horizontal start point or vertical start point is out of the printable area, this command is canceled and the next data is handled as normal data.
• If the horizontal length or vertical length is 0, this command is canceled and the next data is handled as normal data.
• The character mapping position will be the start point specified by ESC T in the print area.
• If the "horizontal start point + horizontal length" is greater than the horizontal printable area, the "horizontal printable area - horizontal start point" is taken as the horizontal length.
• If the "vertical start point + vertical length" is greater than the vertical printable area, the "vertical printable area - vertical start point" is taken as the vertical length.
• The print area is defined by the basic calculation pitch GS P. Once defined, the print area is not changed if the basic calculation pitch is changed by GS P.
• Fractions resulting from calculations are corrected with the minimum pitch of the mechanism, and the remainder is omitted.
• The horizontal start point and horizontal length are calculated with the basic calculation pitch (x). The vertical start point and vertical length are calculated with the basic calculation pitch (y).
70 | CITIZEN |
