HOW TO CLEAN AND MAINTAIN YOUR AIR PURIFIER
Warning: Prior to cleaning or other maintenence, this appliance must be
unplugged from the power supply.
1)A. With the front of the unit facing up, pull the lower end of the inlet grill. (A350, A375UV)
B.Release the inlet grill by pressing from the locking switch and pull forward. (T300, T100)
2)Remove the inlet grill from the unit.
3)A. Remove the HEPA filter by lifting the pull string. (A350, A375UV)
B.Grasp the right and left frame of the filters through the recess on the side of the filter enclosure, and remove the filters. (T300, T100)
4)The
5)Clean the
6)Clean the inlet grill after 200 - 300 hours use, or you can clean it according to
TROUBLE SHOOTING
Problem |
| Reason |
| Solution | |
| 1) | ON/OFF button has not been pressed. | 1) | Press the ON/OFF button. | |
| 2) | Check to make sure the unit is plugged in. | |||
Unit will not operate | 2) | Unit is unplugged. | |||
3) | Check to make sure the filters are prop- | ||||
| 3) | The inlet grill has not been installed or | erly installed and the inlet grill is installed | ||
| locked into place. | ||||
| and locked into place. | ||||
|
|
| |||
|
|
|
|
| |
Reduce air flow or |
|
| 1) | Make sure nothing is in front or at the | |
1) | The inlet or outlet grill may be blocked | back of the air purifier. | |||
poor filtering | |||||
2) | The HEPA filter may be clogged | 2) | Check the filter and the HEPA filter re- | ||
|
|
| placement indicator and replace if necessary. | ||
|
|
|
| ||
The HEPA indication |
|
| 1) Turn on the unit, then insert a small object | ||
bars are still lit after | 1) | The unit has not been reset. | (such as a pin or a paper clip) into the hole | ||
the replaced |
|
| marked RESET until the indicator is off. | ||
|
|
|
|
|
17