iDP3221 User’s Manual
Bit 3: If this error occurred because of a paper jam, for example, remove the cause of the error, and then DEL ENQ n (1 ≤ n ≤ 2) can be used to recover from the error. However, it is not possible to recover from any error due to a circuit problem (e.g., broken wire).
Bit 6: If a head overheat error is detected and the printing is stopped until the head temperature falls. At this time, bit 6 = "1."
(4) Paper detector status (when n = 4 is specified)
| Bit | Status | Hex. | Decimal |
| 0 | Unused | 00 | 0 |
| 1 | Unused | 02 | 2 |
| 2,3 | Paper not found by paper near end detector | 00 | 0 |
| 4 | Unused | 10 | 16 |
| 5,6 | Paper found by paper end detector | 00 | 0 |
| Paper not found by paper end detector | 60 | 96 | |
|
| |||
| 7 | Unused | 00 | 0 |
[See Also] | DLE ENQ, GS a, and GS r, "Identification of Send Status" in Appendix 3 |
| ||
45 | CITIZEN |
