Citizen iDP3221 manual Paper Specifications, Recommended Paper, Printing Position

iDP3221 User’s Manual

2.3Paper Specifications

2.3.1	Recommended Paper
	• Type	: Thermal paper
	• Paper width	: 80 + 0/- 1 mm
	• Paper thickness	: 60 ∼75∝m
	• Roll diameter	: φ83 mm or less
	• Printing surface	: Outside of the roll (Surface)
	• Recommended paper	: TF50KS-E2C (Monochrome) made by NIPPON SEISHI or its equivalent
	• Core	: φ12 mm (Inner diameter), φ18 mm (Outer diameter)

CAUTION:

•Use of non-specified paper may cause irregularity of print density. If this is the case, use the DIP switch to select print density. (See 5. DIP SWITCH SETTING)

•Do not paste the paper to the core.

•If the paper comes in contact with a chemical or oil, it may discolor or lose a record.

•Do not rub the paper surface strongly with a nail or hard metal. It may discolor.

•.Discoloring starts at about 70 °C. Watch out for effects of heat, humidity, light, and so on.

2.3.2Printing Position

Paper Width: 80 mm

About 3.9 mm Printing Area: 72.2 mm About 3.9 mm

5 CITIZEN