CEM/B/021
Host Communications
The S610s has an RS485 serial port allowing it to communicate directly with the host AC2000 controller.
Onboard Card Reading Technologies
The S610s supports onboard head technologies for 125 KHz Proximity, 13.56 MHz MiFare and Inside PicoPass, as well as a multi technology version supporting Proximity + MiFare.
Other technologies can be supported using the two available onboard Wiegand connections.
Proximity to MiFare Smartcard Migration
The S610s multitech version supports the simultaneous reading of both traditional Proximity and MiFare cards. The enables existing sites using proximity card to migrate to MiFare smartcards with zero system downtime and no reduction in security. The MiFare card can be used for other applications such as cashless vending, Biometric storage, logical access, etc.
Off-line Card Validation
The card database is initially downloaded to the reader’s
Product Highlights
memory from the host computer with subsequent changes to card data automatically sent as updates. This ensures that the reader has
Reader Messages
The S610s has a large graphical LCD which is used to display a number of predefined messages to cardholders depending on their privileges e.g. Wrong Zone, Lost/Stolen Card, Card About to Expire, Access Granted etc. Messages to be displayed by the S610s can be modified by the AC2000 software or translated into local languages.
Remote Programming
The S610s reader may be remotely programmed from the host computer, eliminating the need to physically replace firmware, giving increased system flexibility and efficiency. Operational parameters, e.g. door open time, can also be downloaded to the reader.
TECHNICAL SPECIFICATIONS
Physical |
| Database |
|
Size | 142 x 115 x 44mm (5.6 x 4.5 x 1.7”) | Battery Backup | 3.0V rechargeable |
Weight | 370g (13oz) with connectors | - Cardholders | Storage of up to 219,000 cardholders at |
Housing | Flame retardant polycarbonate containing |
| the door. |
| fully encapsulated electronics. | - Transactions | Up to 50,000 transactions in offline |
Colour | Dark and Light Grey |
| operation. |
Power |
| Configuration | Operational parameters are downloaded |
- Voltage | 9 – 14Vdc |
| from host computer. Some configuration |
- Current |
| Standard Door | setting can also be set using the keypad. |
Consumption | 200mA (passive), 320mA (peak) |
| |
|
| Operating Modes | Door Access, Passenger, Turnstile, |
Environmental |
|
| Verification, Manned Control Post, |
IP Rating | IP65 |
| Equipment Enable |
Temperature | Communication Interface | ||
Humidity | Unlimited, also condensing | ||
LED Indicators | Three high intensity LED indicators red, | To Exit Reader | RS485 multidrop cable runs using copper |
| amber and green |
| wire with maximum length of 1.2km |
LCD Indicators | 32 x 122 dots Monochrome Graphics |
| without repeater |
| supertwist LCD with backlight | Connection | 2 part JST Connector |
Keypad | 12 character, standard layout, tactile or | To Host Controller | RS485 multidrop cable runs using copper |
| |||
|
|
| wire with maximum length of 1.2km |
Functionality |
|
| without repeater |
Inputs | Four analog inputs – voltage supplied | Connection | 2 part JST Connector |
Outputs | Two relays fitted – Changeover volt free | Product Codes |
|
| contacts |
| |
- Rating | 30Vdc @ 5A | RDR/611/101 | S610s 125khz HID Prox |
- Duration | Programmable | RDR/611/105 | S610s 13.56MHz MiFare |
| Suppression device (diode, MOV, etc.) | RDR/611/104 | S610s Prox & MiFare |
| required at load | RDR/611/106 | S610s PicoPass™ |
Memory | 2 MB battery backed memory | RDR/611/109 | S610s External Read Head |
Compact Flash | 32 MB Typical (Optional) |
|
|
Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names and/or registered trademarks of their companies.
CEM Systems Ltd Unit 4 Ravenhill Business Park Ravenhill Road Belfast BT6 8AW Northern Ireland | www.cemsys.com |
Tel: +44 (0)28 9045 6767 Fax: +44 (0)28 9045 4535 email: cem.sales@tycoint.com |
