Citizen iDP3221 manual Value

iDP3221 User’s Manual

ESC	!	n
[Function]			Collective specifying the printing mode
[Code]			<1B> H <21> H <n>
[Range]			0 ≤ n ≤ 255
[Outline]			Printing mode is assigned. Each "n" bit indicates the following:
			Bit	Function		Value
					0		1
			0	Character Font	Font A		Font B
			1	Undefined
			2	Undefined
			3	High-lighting	Canceled		Specified
			4	Double height	Canceled		Specified
			5	Double width	Canceled		Specified
			6	Undefined
			7	Underline	Canceled		Specified
[Caution]			• With double height and double width being specified simultaneously, double wide and
			double high characters are consisted.
			• An underline is attached to the full character width, which, however, is not attached to the
			part having been skipped by the horizontal tab. Neither is it attached to 90°-right-turned
			characters.
			• The underline width is as having been specified by the "ESC −" command. (The default
			setting is 1 dot width. )
			• Specification with this command is invalid to Kanji, except specification and cancellation of
			highlighting.
			• In case that double wide character and normal character exist in same one line, the layout of
			underline is consistent one.
[Default]			n = 0
[See Also]			ESC E, ESC −, GS !

[Sample Program]

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H00) ; "H" ;

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H01) ; "H";

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H08) ; "H";

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H10) ; "H";

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H20) ; "H";

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&H80) ; "H";

LPRINT CHR$ (&H1B) ; " ! " ; CHR$ (&HB9) ; "H";

LPRINT CHR$ (&HA) ;

END

49 CITIZEN