iDP3221 User’s Manual
(2)If a sufficient area cannot be provided as a result of step (1), the print area is extended toward the left (so that the left margin is decreased).
Printable Area
| Left Margin | Extended toward |
| The left margin is trimmed. | |
| the right | |
|
| |
|
| Print Area Width |
| (3) If a sufficient area cannot be provided as a result of step (2), the right spacing is | |
| trimmed. |
|
| • When mapping a bit image (or downloaded bit image), if the print area is narrower than the | |
| minimum width of the bit image (two dots for single density, or one dot for double density), | |
| only the line for that image is handled as follows: |
|
| (1) The print area is extended toward the left (so that the left margin is decreased) until it | |
| is equal to the minimum width of the image, but not wider than the printable area. | |
[Default] | nL = 0, nH = 2 |
|
[See Also] | GS L, GS P |
|
95 | CITIZEN |