iDP3221 User’s Manual
ESC | J | n |
|
|
[Function] | Printing and feeding paper in minimum pitch | |||
[Code] |
| <1B> H <4A> H <n> | ||
[Range] | 0 ≤ n ≤ 255 | |||
[Outline] | Prints the data held in the print buffer and feeds paper by n/360 inches. The beginning of | |||
|
| the line is taken as the start position for the next print. | ||
[Caution] | The line feed width can be set separately for the Standard and Page modes. | |||
|
| This command does not affect the line feed width defined by ESC 2 or ESC 3. | ||
|
| The basic calculation pitch is set by GS P. | ||
|
| Fractions resulting from calculation are corrected with the minimum pitch of the mechanism, | ||
|
| and the remainder is omitted. | ||
|
| In Standard mode, this command uses the vertical (paper feed direction) basic calculation | ||
|
| pitch (y). | ||
|
| In Page mode, this command acts differently depending on the start point: | ||
|
| (1) | If the start point specified by ESC T is top left or bottom right, the command uses the | |
|
|
| vertical (paper feed direction) basic calculation pitch (y). | |
|
| (2) If the start point specified by ESC T is top right or bottom left, the command uses the | ||
|
|
| horizontal (perpendicular to the paper feed direction) basic calculation pitch (x). | |
|
|
| The maximum settable line feed width is 1016 mm (40 inches). A setting greater than | |
|
|
| this maximum is trimmed to the maximum. The beginning of the line is taken as the | |
|
|
| start position for the next print. | |
[Default] | Undefined | |||
[Sample Program] | [Print Results] | |||
See Sample Program and Print Results for ESC 2 on page 57.
64 | CITIZEN |
