Canon MPC600F/400 manual Message Error Code Cause Action

Message (Error Code) Cause Action

ECM TX	The machine is sending a fax using Error
	Correction Mode (ECM).

ECM transmissions may take longer than normal transmissions. Turn off ECM if you need to transmit quickly, or if you know your local lines are in good condition. (→ ECM TX, p. 9-5)

MEMORY USED nn % Shows the percentage of memory currently in use.

If you need more space, wait for the machine to send any faxes. Also, print or delete any documents in memory you no longer need. (→ pp. 4-14, 4-15)

NO RX PAPER ( 012) The other party’s fax machine is out of paper or its memory is full.

Contact the other party and have them load paper in their fax machine or free up space in their fax machine’s memory.

NO TEL # ( 022)	The one-touch speed dialling button or
	coded speed dialling code you entered has
	not been registered.

Register the one-touch speed dialling button or coded speed dialling code. (→ pp. 3-2, 3-4)

NOT AVAILABLE	In manual sending via the handset, you	Use regular dialling, or enter a one-touch
	entered a speed dialling number that is	speed dialling button or coded speed
	assigned to a group.	dialling code that only has one fax/
		telephone number registered.
REC’D IN MEMORY	The machine received the fax in memory	Load paper in the multi-purpose tray
	because paper or ink ran out, or a paper	(→ Quick Start Guide), replace the Ink
	jam occurred.	Tank(s) (→ Reference Guide), or clear
		the paper jam. (→ Reference Guide)
RECEIVED IN FILE	Your PC was off and a document was	Upload the document to your PC, or print
	received in the machine’s memory.	the document. (→ pp. 4-14, 5-5)
	The MultiPASS Status Monitor is not	On the Windows® desktop, click Start
	running. (Windows 95/98/Me)	and point to Programs. On the Programs
		menu, point to MultiPASS Suite, then
		click MultiPASS Status Monitor.

TRY AGAIN IN B&W	You tried sending a colour document to a
( 085)	machine that does not support colour
	faxing.

Try sending again in black & white (→ p. 4-1). Alternatively, enable the COLOUR DIRECT TX setting.

(→ p. 9-6)

TX/RX	CANCELLED	You pressed Stop/Reset to cancel the	If required, try sending or receiving
		transmission.	again.
TX/RX	NO. nnnn	When the machine sends or receives a fax,	Write the number down if you will need it
		it assigns it a unique identification number	later.
		(nnnn).

TX nnnn		The machine is sending a document and its
SCANNING P. nnn		memory is full.
MEMORY	FULL
PLEASE	WAIT

The machine continues to send the document as memory becomes available.

8-2