Canon MPC600F/400 Enables/disables printing of the sender Information → p, Number. → p, Cradle

Name

Description

Settings

	5. TX TERMINAL ID		Enables/disables printing of the sender	ON
			information (→ p. 2-3)	OFF
		1. TTI POSITION	Selects the position of the identification header	OUTSIDE IMAGE
			(outside or inside the image area).*	INSIDE IMAGE
		2. TELEPHONE #	Selects the prefix for the identification header	FAX
		MARK	number. (→ p. 2-3)	TEL
	6. OFFHOOK ALARM		Enables/disables the off hook alarm that alerts	ON
			you when the handset is not seated properly in its	OFF
			cradle.
	7. VOLUME CONTROL		Sets the volume of the machine sounds.	-
		1. CALLING	When the machine is set to FAX/TEL AUTO	1/2/3
		VOLUME	SW, selects the ring volume when the machine
			detects a voice call.
		2. LINE MONITOR	Selects the line monitor volume (sound during	0 (off)/
		VOL	dialling and on hook)	1/2/3
	8. RX CALL LEVEL		When the machine is set to FAX/TEL AUTO	HIGH
			SW, selects the tone of incoming calls.	STANDARD
	9. TEL LINE TYPE		Selects the dialling method the machine uses for	TOUCH TONE
			your telephone line type. (→ p. 2-6)	ROTARY PULSE
	10. R-KEY SETTING		Enables dialling through a switchboard. If you	PSTN
			select PBX, you can select additional sub-	PBX
			settings. (→ p. 2-6)
2. REPORT SETTINGS
	1. TX REPORT		Enables/disables automatic printing of a	PRINT ERROR
			transmission report. (→ p. 7-3)	ONLY
			PRINT ERROR ONLY:	OUTPUT YES
			Prints a report only when a transmission error	OUTPUT NO
			occurs.
			OUTPUT YES:
			Prints a report every time you send a document.
			OUTPUT NO:
			No report is printed.
		PRINT WITH IMAGE	If you select PRINT ERROR ONLY or OUTPUT	ON
			YES above, enables/disables printing of the first	OFF
			page of the fax under the report (black & white
			faxes only).

*Can only be adjusted for black & white transmissions. For colour transmissions, the TTI information is positioned inside the image area.

9-4